Search Criteria
Products meeting the search criteria
Bestseller
Manufacturer: Bestfix
Model: DA-..CNK
Galvanized Brad Type DA angled
DA Brad has a bond angle of 34° and is available in the following lengths:
32 mm - 4.000 pcs per box
38 mm - 4.000 pcs per box
44 mm - 4.000 pcs per box
50 mm - 4.000 pcs per box
The DA Brad is equal to:
Bostitch DA
Dewalt DK51275K
Senco D..
€20.93
Ex Tax:€17.30
Manufacturer: Bestfix
Model: DA-..RVS
Angled brad Type DA in stainless steel
The SS DA Brad has a bond angle of 34° and is available in the following lengths:
32 mm - 4.000 pcs per box
38 mm - 4.000 pcs per box
44 mm - 4.000 pcs per box
50 mm - 4.000 pcs per box
DA-brad is equal to:
Bostitch DA
Dewalt DK51275..
€110.84
Ex Tax:€91.60
New
Manufacturer: Bestfix
Model: N-..(16G)CNK
16 G Brad is a finishing nail with a wire thickness of 1.6 mm and a head width of 2.8 mm. These brads are widely used for finishing work. The brads are available in many lengths from 15 mm to 50 mm. Some of the tasks where these brads are commonly used include attaching top battens, finishing strips..
€6.41
Ex Tax:€5.30
Bestseller
Outlet
Manufacturer: Bestfix
Model: 16G
Galvanized Brad 16 gauge, also called FN-brad, is available in the following lengths:
20 mm – 2.500 pcs per box
25 mm - 5.000 pcs per box
32 mm - 2.500 pcs per box
38 mm - 2.500 pcs per box
40 mm - 2.500 pcs per box
45 mm - 2.500 pcs per box
50 mm - 2.500 pcs per box
57 mm - 2.50..
€4.66 €6.66
Ex Tax:€3.85
Manufacturer: Bestfix
Model: N-..(16G)SS
16 G Brad is a finishing nail with a wire thickness of 1.6 mm and a head width of 2.8 mm. These brads are widely used for finishing work. The brads are available in many lengths from 15 mm to 50 mm. Some of the tasks where these brads are commonly used include attaching top battens, finishing strips..
€88.69
Ex Tax:€73.30
New
Manufacturer: Press
Model: NA-..CNK
The NA brad (20 degrees) is a high-quality 16-gauge angled brad nail, ideal for fine and precise work such as carpentry, attaching baseboards, and other finishing applications.
With a head width of 3.00 mm, this brad provides a subtle finish without compromising on strength.
The NA Brad is ava..
€11.98
Ex Tax:€9.90
New
Manufacturer: Press
Model: NA-..RVS
The NA brad (20 degrees) is a high-quality 16-gauge angled brad nail, ideal for fine and precise work such as carpentry, attaching baseboards, and other finishing applications.
With a head width of 3.00 mm, this brad provides a subtle finish without compromising on strength.
The NA Brad is ava..
€62.80
Ex Tax:€51.90
Outlet
Manufacturer: Bestfix
Model: SPIN-AL
Headless brad from aluminium type Pin 50 is available in the following lengths:
38 mm - 2.000 pcs per box..
€23.29 €33.28
Ex Tax:€19.25
Manufacturer: Rapid
Model: MS840
The MS840 combi tacker by Rapid® is a light, powerful and durable hand stapler with cast aluminium casing and all steel interior wear parts. Ergonomic handle and grip covered with soft non-slip material. A professional tool for demanding tasks.
Fires flatwire staples type 11 from 6 mm upto 14 mm ..
€72.24
Ex Tax:€59.70
Outlet
Manufacturer: Bestfix
Model: 23G/
Galvanized brad 23 gauge, also called B6-brad
This 23G brad is available in the following lengths:
12 mm - 10.000 pcs per box
15 mm - 10.000 pcs per box
Brad 23G is equal to:
Omer B6..
€13.19 €17.18
Ex Tax:€10.90
Bestseller
Manufacturer: Bestfix
Model: J-..(18G)RVS
18 G Mini brads are finishing nails with a wire thickness of only 1.2 mm and a head width of 2.0 mm. These mini brads are widely used for trim work where a small so-called wound (imprint) is desired. The mini brads are available in many lengths from 10 mm to 50 mm. Some of the tasks for which these ..
€35.82
Ex Tax:€29.60
Manufacturer: Nikema
Model: A710000M04
Pneumatic bradnailer M10-SIC-6-MG30 by Nikema® for 23 gauge brads and headless brads type Pin 6
This combi tacker fires borth brads and pins 23G from 15 mm upto 30 mm in length
Safety on nose
Comfortable rubber grip
360 degree rotating air outlet..
€378.73
Ex Tax:€313.00